=========================================================== LAN Router BRN Loader V1.06 build Jun 04 2002 16:57:22 Broad Net Technology, INC. =========================================================== INTEL TE28F800B3-B bottom boot 16-bit mode found Copying boot params.....DONE Press any key to enter command mode ... [BRN Boot]:h ====================== [U] Upload to Flash [E] Erase Flash [G] Run Runtime Code [A] Set MAC Address [#] Set Serial Number [V] Set Board Version [S] Serial Test [I] Parallel Test [P] Print Boot Params ====================== [BRN Boot]:e ERASE Flash -------------------------------------- Area Address Length -------------------------------------- [0] Boot 0x00000000 128K [1] Configuration 0x00020000 64K [2] Web Image 0x00030000 192K [3] Code Image 0x00060000 576K [4] Params Area 0x000F0000 64K -------------------------------------- Enter area to ERASE: ERROR: Not a valid area. [BRN Boot]: ====================== [U] Upload to Flash [E] Erase Flash [G] Run Runtime Code [A] Set MAC Address [#] Set Serial Number [V] Set Board Version [S] Serial Test [I] Parallel Test [P] Print Boot Params ====================== [BRN Boot]:p MAC address: 00-04-E2-4B-99-DA Serial number: A230024664 Hardware version: 01 [BRN Boot]:u UPLOAD Flash -------------------------------------- Area Address Length -------------------------------------- [0] Boot 0x00000000 128K [1] Configuration 0x00020000 64K [2] Web Image 0x00030000 192K [3] Code Image 0x00060000 576K [4] Params Area 0x000F0000 64K -------------------------------------- Enter area to UPLOAD: 4 Upload area 4. Are you sure? (Y/n) [BRN Boot]: ====================== [U] Upload to Flash [E] Erase Flash [G] Run Runtime Code [A] Set MAC Address [#] Set Serial Number [V] Set Board Version [S] Serial Test [I] Parallel Test [P] Print Boot Params ====================== [BRN Boot]:g Unzipping program from bank 2...failed(04) Try to find image for running... Unzipping program from bank 3...doneABCDEFGH GLOBAL_CTOR_BODY in gbl-ctors.h nptrs : 0 __CTOR_LIST__[0]: 14bdac, 0, - ../../gcc/libgcc2.c 2874 __CTOR_LIST__[1]: 14bdb0, 0, - ../../gcc/libgcc2.c 2874 __CTOR_LIST__[2]: 14bdb4, 0, - ../../gcc/libgcc2.c 2874 __CTOR_LIST__[3]: 14bdb8, 0, - ../../gcc/libgcc2.c 2874 ATEXIT : 1016f4 Firmware occupies 0x00040000 ~ 0x006FE890 DATA area is 138280 bytes from 0x0012AD6C to 0x0014C990 BSS area is 5971708 bytes from 0x0014C994 to 0x006FE88C System startup... System startup... soho initialize COLOR1 : 450000 INTEL TE28F800B3-B bottom boot 16-bit mode found Set flash memory layout to BPARAMS+RECOVER_KERNEL Bootcode version: V1.06 Serial number: A230024664 Hardware version: 01 sizeof(struct III_Config_t) is 60692 INTEL TE28F800B3-B bottom boot 16-bit mode found default route: 0.0.0.0 buffer0 pointer init OK! buffer1 pointer init OK! Init NAT data structure ip:[127.0.0.1], mask:[255.255.255.255] Interface 0 ip = 127.0.0.1 After CLONE Mac addr: 0004e24b99db Nallocated memory addr 632bf0 RxHBufFull addr 632c44 RxLBufFull addr 632c48 RxHBufFull 0 RxLBufFull 0 allocated memory addr 632e18 allocated memory addr 632f18 allocated memory addr 633318 allocated memory addr 633398 allocated memory addr 633598 allocated memory addr 633618 allocated memory addr 633818 allocated memory addr 633858 allocated memory addr 633958 init handler table, handler= cf058 SysSetInterrupt: vector 7 handler d066c Enable CPU port... Enable all vlans... end of InitAm5106Switch.... Ballocated memory addr 636538 TC Mac addr: 0004e24b99da Init NAT data structure ip:[192.168.2.0], mask:[255.255.255.0] ip:[127.0.0.1], mask:[255.255.255.255] Interface 1 ip = 192.168.2.1 Mac addr: 0004e24b99db Init NAT data structure ip:[192.168.2.0], mask:[255.255.255.0] ip:[127.0.0.1], mask:[255.255.255.255] Interface 2 ip = 0.0.0.0 WLAN : Initialization ... WLAN (1) : CardToIOMode() ATMEL : BSR = 0200 ATMEL : AR = 3004 ATMEL : read DR1 = 0123 ATMEL : read DR2 = 4567 ATMEL : read byte DR1(AR=3001) = 01 ATMEL : read byte DR2(AR=3002) = 23 ATMEL : read byte DR3(AR=3003) = 45 ATMEL : read byte DR4(AR=3004) = 67 ATMEL : BSR = 0200 ATMEL : AR = 3004 ATMEL : read DR3 = 89ab ATMEL : read DR4 = cdef WLAN (2) : InitAdapter() WLAN (3) : SetParameters() WLAN : WEP OFF WLAN : Global_Adapter.Lookahead == 0 WLAN (4) : InitAndStartCard() ATMEL : CARD_TYPE_EEPROM ATMEL : Copy Code To Internal Memory (** EEPROM **) ATMEL : *** Downloading Firmware to internal memory *** MAC success to BOOT... WLAN : MAC = 00:04:e2:4b:30:7f ATMEL : Suucess to set Fragmentation Threshold(0x1)... Configuring WEP (Disabled-Mandatory-Open System) WEP Key to use: 0 ->Disabled WEP ATMEL : Set card into AP MODE ATMEL : The wireless firmware version is 3.4.9 ATMEL : Start Scanning from Channel 1 SysSetInterrupt: vector 6 handler bee7c WLAN ISR : COMMAND_COMPLETE ATMEL : Scan Complete...(0x8) ATMEL : Scan Command in Progress... WLAN : Initialization OK! Init NAT data structure ip:[192.168.2.0], mask:[255.255.255.0] ip:[127.0.0.1], mask:[255.255.255.255] hwlan_ioctl Interface 4 ip = 192.168.2.1 hwlan_ioctl ruleCheck()> Group: 0, Error: Useless rule index will be truncated ruleCheck()> Group: 1, Error: Useless rule index will be truncated ruleCheck()> Group: 2, Error: Useless rule index will be truncated CBAC rule format check succeed !! reqCBACBuf()> init match pool, Have: 1000 Memory Address: 0x005c8eb0 ~ 0x005cfc2c reqCBACBuf()> init timeGap pool, Have: 10000 Memory Address: 0x005cfc30 ~ 0x00600984 reqCBACBuf()> init sameHost pool, Have: 2000 Memory Address: 0x00600990 ~ 0x006103b0 CBAC rule pool initialized !! **** join_mgroup, laddr 102a8c0, sock->multicast_if=8994 **** sd 00000000, join group 20000e0, ifno 1, slot 0 **** join_mgroup, laddr 102a8c0, sock->multicast_if=8994 **** sd 00000000, join group 10000e0, ifno 1, slot 1 **** join_mgroup, laddr 0, sock->multicast_if=8994 **** join_mgroup, laddr 0, sock->multicast_if=8994 **** join_mgroup, laddr 102a8c0, sock->multicast_if=8994 **** join_mgroup, laddr 102a8c0, sock->multicast_if=8994 Init NAT data structure ip:[192.168.2.0], mask:[255.255.255.0] ip:[127.0.0.1], mask:[255.255.255.255] RUNTASK id=1 if_task if0... RUNTASK id=2 if_task if1... RUNTASK id=3 if_task if2... RUNTASK id=4 if_task if4... RUNTASK id=5 timer_task... RUNTASK id=6 conn_mgr... RUNTASK id=7 period_task... RUNTASK id=8 dhcp_daemon... RUNTASK id=9 dhcp_clt... httpd: listen at 0.0.0.0:1900 HTTPD TIMER_RESOURCE:5, FS_RESOURCE:6 RUNTASK httpd... RUNTASK id=13 dnsproxy... RUNTASK id=14 pptp_callmgr... RUNTASK id=15 dhcpd_mgmt_task... UPnP is disabled Starting Multitask... period_task running!!! [pptp_call_mgr]: listen_fd = 48. - call_mgr.c 132 httpd: listen at 192.168.2.1:80 dhcpd_mgmt_task started... ### STATION_STATE_SCANNING ### Channel = 7 ### STATION_STATE_SCANNING ### Channel = 7 WLAN ISR : COMMAND_COMPLETE ATMEL : Scan Complete...(0x1) ATMEL : Adapter->Channel = 1 Set card into AP MODE ATMEL : SCAN Completed... WLAN ISR : COMMAND_COMPLETE ATMEL : Start Command SUCCEEDED (0x1) ATMEL : BeaconPeriod: 0 period_task running 60 [dhcp_clt] could not find DHCP daemon to get information period_task running 120 period_task running 180 [dhcp_clt] could not find DHCP daemon to get information period_task running 240 ATMEL : C80211_SUBTYPE_MGMT_Authentication ATMEL : SendAuthenticationResponse 2 ATMEL : C80211_SUBTYPE_MGMT_ASS_REQUEST ATMEL : ASSOCIATION ID = 2, ASSOCIATION MAC = 00:40:05:b8:e7:b6 ATMEL : SendAssociationResponse period_task running 300 [dhcp_clt] could not find DHCP daemon to get information period_task running 360